Abstract
The PCIe2 LP 8 Gb 4-port Fibre Channel Adapter (feature EN0Y) is a low profile adapter for PCI Express 2.0 slots in IBM® Power Systems™ servers. It is based on the QLogic ISP2532 controller and operates at link speeds of 2, 4, and 8 Gbps, and automatically negotiates to the highest speed possible. Each port provides single initiator capability over a fiber optic link, or multiple initiator capability with NPIV. The ports have LC type connectors and use shortwave laser optics.
Contents
The PCIe2 LP 8 Gb 4-port Fibre Channel Adapter (feature EN0Y) is a low profile adapter for PCI Express 2.0 slots in IBM® Power Systems™ servers. It is based on the QLogic ISP2532 controller and operates at link speeds of 2, 4, and 8 Gbps, and automatically negotiates to the highest speed possible. Each port provides single initiator capability over a fiber optic link, or multiple initiator capability with NPIV. The ports have LC type connectors and use shortwave laser optics.
The following figure shows the PCIe2 LP 8 Gb 4-port Fibre Channel Adapter.
Figure 1. PCIe2 LP 8 Gb 4-port Fibre Channel Adapter
Did you know
This QLogic 8 Gb host bus adapter (HBA) enables an end-to-end SAN solution using 8 Gb Fibre Channel technology for Power Systems servers. It provides the ability to build high-performance, highly available SANs and is easy to set up and integrate into existing SAN configurations.
Offering four 8 Gb ports on a single adapter maximizes SAN connectivity and performance while maintaining multipath redundancy.
These adapters take advantage of QLogic’s StarPower technology, which provides energy-smart features. StarPower technology offers dynamic and adaptive power-management features, such as power-optimized and bandwidth-optimized intelligent PCIe link training, low-power switching power supplies, and a thermally efficient layout that requires lower airflows.
Part number information
The following table shows the ordering part numbers and feature codes.
Table 1. Ordering part numbers and feature codes
| Description | Power Systems feature code |
| PCIe2 LP 8 Gb 4-port Fibre Channel Adapter | EN0Y |
Features
The adapter has the following features:
- Operates at 2, 4, or 8 Gbps (auto-negotiation)
- Persistent binding
- LUN masking
- 2,048 concurrent logins
- PCI Express 2.0 x8 compliance with backwards compatibility with PCI Express 1.0a
- Four SFP+ ports with LC-style connectors
- Standard PCI Express card with low profile MD2 form factor
- Support for both standard and low-profile PCIe slots
Specifications
The adapter has the following specifications:
- ASIC: QLogic ISP2532 .
- Memory: 1 MB SSRAM per port.
- Data throughput: 3200 MBps (full-duplex) per port.
- I/O operations per second (IOPS): 200,000 per port.
- Protocols: FCP-3-SCSI and FC-Tape (FCP-2).
- Standard supported: Enhanced Authentication (FC-SP), Data Integrity (T10), and Network isolation (NPIV).
- N_Port ID Virtualization (NPIV) capability is supported through VIOS.
- Power usage: 12 W (typical), 17 W (max).
- RoHS 6 compliant.
For cables, use multimode fibre optic cables with short-wave lasers that adhere to the following specifications:
- OM3: Multimode 50/125 micron fibre, 2000 MHz*km bandwidth
- OM2: Multimode 50/125 micron fibre, 500 MHz*km bandwidth
- OM1: Multimode 62.5/125 micron fibre, 200 MHz*km bandwidth
Because core sizes are different, OM1 cables can only be connected to other OM1 cables. For best results, OM2 cables should not be connected to OM3 cables. However, if an OM2 cable is connected to an OM3 cable, the characteristics of the OM2 cable apply to the entire length of the cables.
The following table shows the supported distances for the three different cable types at the three different link speeds.
Table 2. Supported cables
| Cable | 2.125 Gbps | 4.25 Gbps | 8.5 Gbps |
| OM3 | 0.5 m - 500 m | 0.5 m - 380 m | 0.5 m - 150 m |
| OM2 | 0.5 m - 300 m | 0.5 m - 150 m | 0.5 m - 50 m |
| OM1 | 0.5 m - 150 m | 0.5 m - 70 m | 0.5 m - 21 m |
Physical specifications
The adapter has the following physical specifications:
- Height: 64 mm (2.5 in.)
- Width: 167 mm (6.6 in.)
- Depth: 25 mm (1.0 in.)
- Weight: 113 g (0.25 lb.)
Operating environment
The adapter is supported in the following environment:
- Temperature:
- Operating: 0° - 55°C (32° - 131°F) at 0 - 914 m (0 - 3,000 ft.)
- Storage: -40° - 70°C (-40° - 158°F) at 914 - 2,133 m (3,000 - 7,000 ft.)
- Relative humidity:
- Operating: 10% - 90% (relative, non-condensing)
- Non-operating: 5% - 93% (relative, non-condensing)
Warranty
These features assume the same warranty or maintenance terms as the machine in which they are installed for the full warranty or maintenance period announced for such a machine.
Supported servers
The PCIe2 LP 8 Gb 4-port Fibre Channel Adapter is supported in the IBM Power Systems servers listed in the following table.
Table 3. Supported servers
| Adapter | Feature |  |  |  |  |  |  |  |  |  |
| PCIe2 LP 8 Gb 4-port Fibre Channel Adapter | EN0Y | Y | Y | Y | Y | N | N | N | N | N |
Supported operating systems
The adapter supports the following operating systems:
- AIX® Version 7.1 with the 7100-01 Technology level and Service pack 4 or later.
- AIX Version 7.1 with the 7100-00 Technology Level and Service Pack 6 or later (planned availability 6/29/2012).
- AIX Version 6.1 with the 6100-07 Technology Level and Service Pack 4 or later.
- AIX Version 6.1 with the 6100-06 Technology Level and service Pack 8 or later (planned availability 6/29/2012).
- AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 6 or later (planned availability 6/29/2012). AIX 5.3 service extension is required.
- IBM i 6.1 with 6.1.1 machine code or later supported through VIOS 2.2.1.4.
- Red Hat Enterprise Linux 5.8 for POWER® or later.
- Red Hat Enterprise Linux 6.2 for POWER or later.
- Novel SUSE Linux Enterprise 10, Service Pack 4 or later.
- Novel SUSE Linux Enterprise 11 Service Pack 2 or later.
- VIOS 2.2.1.4 or later.
Related publications
For more information, see the following documents:
- Adapter Quick Start Guide:
http://www.ibm.com/support - IBM US Announcement Letter :
http://ibm.com/common/ssi/cgi-bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS112-069 - Driver update for Linux:
http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html - IBM Power Systems Facts and Features:
http://ibm.com/systems/power/hardware/reports/factsfeatures.html - IBM Power Systems servers
http://www.ibm.com/systems/power/hardware
Others who read this also read
Special Notices
The material included in this document is in DRAFT form and is provided 'as is' without warranty of any kind. IBM is not responsible for the accuracy or completeness of the material, and may update the document at any time. The final, published document may not include any, or all, of the material included herein. Client assumes all risks associated with Client's use of this document.